Important tips before configuration:
1. The camera only supports 2.4GHz band not 5GHz. Please close the 5GHz before connecting, if your router supports both bands.
2. The name and password of your Wi-Fi should not contain special characters such as 'and &.
3. Make sure that your Wi-Fi encryption is WPA2-PSK(AES).
Step 1: Launch the iSmartViewPro app, Click + to access Add Camera page and select "Add cameras via WiFi configuration guide"
Step 2: Scan the QR code on the bottom of the camera, and name the camera. Then "Next"
Step 3: Input correct WiFi password, then "Confirm", and the camera will try to connect. It will go back to the camera page and shows "online" if adds successfully. Please tap "try again" and repeat the process for 2-4 times, if it fails to connect. The whole process should be finished within 5 minutes from power on.
Otherwise, the camera should be unplugged and powered back.
1 * 720P IP Camera
1 * Power Adapter
1 * Ethernet Cable
1 * Bracket
1 * Set of Mounting Screws
1 * Quick Installation Guide
For more detailed instruction, please download it by this link: http://cd.ipcamdata.com
Free return and exchange service within 60 days and free technical assistance via email. Email us if you meet any problems.