This door sensor is intended to be used in combination with the components of the CPVAN CP1 Home Alarm System Kits and can be wirelessly connected to the CPVAN CP1 Alarm Unit or the CPVAN CP2 PIR Motion Detector (available separately)
INSTALLATION DESCRIPTION: Specification:
1. Install magnet part in movable doors or windows, and the reed switch part in the frames of doors and windows
2. These two parts should be installed completely parallel. The distance between them should be less than 5mm. 0mm is the best. If the distance for installation is larger than the active gap, the magnetic switch will out of use.
3. The magnetic switch should be mounted in the place which is hard to reach.
Operating voltage: DC 3.0V
Operating current: Static current:?7Ua(DC 3.0V) Working current: ?25Ma(DC 3.0V)
Low-voltage alarm: 2.5V±0.1V
Active gap: ?14mm
Operating temperature: 14?~131?
Installation mode: Affix to the door or frame by screws
Transmitting power: ?13dBm
Wireless frequency: 433MHz
Battery life: >1 year
1* Door Sensor