AVENK HDMI Wall Plate Extender 170ft/50m with Transmitter and Receiver RX TX Over Single Cat5e/6 Support 1080P 3D 1920x1200 60fps

Price: $68.99
Product prices and availability are accurate as of 2019-05-22 14:33:15 EDT and are subject to change. Any price and availability information displayed on http://www.amazon.com/ at the time of purchase will apply to the purchase of this product.
Usually ships in 24 hours
CERTAIN CONTENT THAT APPEARS ON THIS SITE COMES FROM AMAZON SERVICES LLC. THIS CONTENT IS PROVIDED 'AS IS' AND IS SUBJECT TO CHANGE OR REMOVAL AT ANY TIME.

Manufacturer Description

Introduction
AVENK HDMI Single Cat5e/6 Wall Plate Extender includes transmitter and receiver. Transmitters combine HDMI video, audio and control signals, then transmit them through single CAT5e cable. Receivers get these signals, separate signals and rebuild video, audio and control, output through HDMI interfaces. This product can achieve all functions through single CAT5e cable.

NOTE: The default EDID output is 1080P@60Hz 2 channel audio. If you want to set EDID, follow this step:
1. Connect display input with extender TX's HDMI input
2. Connect TX's 12V power
If you see link LED flash fast and then stay on, EDID set successfully. If it flashes slowly, EDID set failed. It remains the default setting

Features and Specifications
1. Resolution and distance: 1080P 170ft (50meters)-CAT5e / 200ft (60meters)-CAT6; 720P/1080i 200ft (60meters)-CAT5e / 270ft (80meters)-CAT6
2. HDMI Interface Standard: HDMI 1.3 standard (HDMI 1.4b 3D function), HDCP 1.2, support EDID learning
3. Supports 3D signals (all 7 formats), such as frame packing, Side-by-side, Top-to-Bottom, etc
4. Support Bi-direction remote IR (RX-TX and TX-RX)
5. Support POE function: power over UTP cable
6. Interface Transmitter and Receiver: HDMI input, IR output (3.5mm), IR input (3.5mm), RJ45 Ethernet interface, 12V DC in
7. Video Bandwidth: Maximum TMDS clock frequency 165MHz, 4.95Gbps
8. Audio Formats: 8-channel, support Dolby True HD and DTS Master
9. Remote IR: 38KHz (Model A) or 20-60KHz (Model B)
10. TMDS Input Signal: 1.2 volts (point to point)
11. DDC Input Signal: 5 volts (point to point)
12. ESD Level: HBM +8KV (Contact Dischatge)
13. Power: < 3.5W TX or < 2.5W RX

Packaging List
1 x Transmitter
1 x Receiver
2 x IR blaster
2 x IR receiver
1 x DC 12V/1A adapter
1 x User manual

Warranty
All AVENK products are with 12 months limited warranty and friendly customer service.

Product Features

Extend upto 170ft (50 meters) at resolutions 1080P 3D or 1920x1200 60fps, and 200ft (60 meters) at 1080i/720P over single CAT5e/6 cable Support HDMI V1.3, HDMI1.4b 3D function, HDCP 1.2; Support EDID. Compatible with DVI 1.0 Supports Dolby True HD, DTS-master etc. Support VESA DDC and hot swap technology (HPD) Support Bi-direction remote IR (RX-TX and TX-RX); Supports cascade to enhance extending distance. Support POE function power over UTP cable, Single 12V DC power supply from any side of TX or RX With 12-month limited warranty by Avenk and friendly customer service

Write a Review