The Minimote combines a simplistic design with advanced features, making programming and controlling your Z-Wave network easier than ever. Four recessed scene buttons on the main face of the remote allow you to conveniently turn scenes on/off and adjust brightness with simple button taps.
The easy-to-use, Aeon Labs Z-Wave DSA03202 remote control by Aeon Labs is identical in functionality as Minimote model DSA03202W-ZWUS. The installed on-board firmware is the latest edition version, bringing you identical capabilities as the Minimote DSA03202W-ZWUS. The differences are only cosmetic, with the DSA03202 v1 having numbered buttons, while the DSA03202W-ZWUS does not. The DSA03202W-ZWUS is also available in color black. Charging your Minimotes' battery 1)Plugin your Minimote into any USB port (Smart Phone Charger, Laptop, Desktop, etc). 2)You'll notice that a red LED will appear next to the miniUSB port of the Minimote. 3)Leave your Minimote charging for at least 2 hours to fully charge the Minimote (assuming that you are using at least a 5VDC and 1A output charging adapter). 4)When the LED next to the miniUSB port turns blue, this will indicate a full charge on your Minimote. You may now remove the Minimote from USB connection.
Extended battery life
USB charging & sync cable included
Same functionality as newer G1(v2) models